Users Guide

24 | Setting Up the Monitor
Connecting the USB 3.0 cable
After you have completed connecting the DP/HDMI cable, follow the procedures below
to connect the USB 3.0 cable to the computer and complete your monitor setup:
1 Connect the upstream USB 3.0 port (cable supplied) to an appropriate USB 3.0 port
on your computer. (See
Bottom View for details.)
2 Connect
the USB 3.0 peripherals to the downstream USB 3.0 ports on the monitor.
3 Plu
g the power cables for your computer and monitor into a nearby outlet.
4 Turn On the monitor and the computer.
If your monitor displays an image, installation is complete. If it does not display an
image, see Universal Serial Bus (USB) Specific Problems .
5 Use the cable slot on the monitor stand to organize the cables.
Organizing Your Cables
After attaching all necessary cables to your monitor and computer, (See Connecting Your
Monitor for cable attachment,) organize all cables as shown above.