Installation guide

• Ground cable (not included, optional)

• Ground cable screws (included)

• Copper/fiber cables

Other optional components are:

• Additional power supply unit

• Additional fan module

• Additional mounting brackets (if installing in a four-post rack or cabinet)

Features

The S4810–ON offers the following features.

• S4810–ON CPU and switch processor

• Hot-swappable redundant power supply

• 19 inch rack-mountable

• Standard 1U chassis height

Ports

The S4810–ON offers the following ports.

• External Serial RS-232 port (RJ45 type)

• Remote management port

• 48–ports 10GbE and 4–ports 40GbE

• Universal serial bus (USB)-A port

• USB-B port

System Status

You can view S4810–ON status information using the light emitting diodes (LEDs).

LED Displays

The S4810–ON includes LED displays on the I/O side of the chassis (shown in the following illustration).

When the S4810–ON powers up or reloads, the PSU LED is solid green. For additional LED information,

refer to your third-party operating software documentation.

The S4810–ON system LEDs are:

• System status (SYS)

• Stack Master indicator (MASTER)

• Fan status (FAN)

• Power status (PSU)

Additionally, the PSUs and fans have LEDs that indicate their individual status:

• PSU status

• Fan tray status

The S4810–ON System