Users Guide

40 Using Your Projector
SHARPNESS— Press to increase the sharpness and to decrease
the sharpness.
TINT— Press to increase the amount of green in the image and
to decrease the amount of green in the image.
WHITE INTENSITY— Press and use and to display white
intensity.
COLOR SPACE— Allows you to select the color space. The options are:
RGB, YCbCr, and YPbPr.
VGA OUTPUT— Select On or Off the VGA output function at projector
standby status. Default is Off.
NOTE:
1 If you adjust the settings for Color Temperature , RGB Color Adjust ,
Saturation , Sharpness , Tint , and White Intensity the projector
automatically switches to Custom mode.
2 Saturation , Sharpness , and Tint only available when the input source
is from Composite or S-Video.
IMAGE SETTINGS (NO INPUT SOURCE)—Select and press to activate
image settings. The image settings menu provides the following options:
VGA O
UTPUT— Select On or Off the VGA output function at projector
standby status. Default is Off.
DISPLAY SETTINGS (IN PC MODE)—Select and press to activate display