User Manual

Possible Solutions

Screen image is too

small

Check the Aspect Ratio setting in the Display settings OSD.

Reset the monitor to Factory Settings (Factory Reset).

Cannot adjust the

monitor with the

buttons on the bottom

of the panel

Turn off the monitor, unplug the power cord, plug it back, and then

turn on

the monitor.

No input signal when

user controls are

pressed

Check the

signal

source. Ensure the computer

is not in standby

sleep

mode

moving

the

mouse or pressing any key on the

keyboard.

Check if the video cable is plugged in properly. Disconnect and

reconnect the video cable if necessary.

Reset the computer or video player.

The picture does not

fill the entire screen

Due to different video formats (aspect ratio) of DVDs, the monitor may

display in full screen.

Run the built-in diagnostics.

∞

Troubleshooting