Owner's manual

Driver Installation 25
4 From the list of drivers displayed, select the driver that you require. Select the
self-extracting zip file and click
Run . Copy the driver to a diskette drive, CD,
DVD, or USB drive. Repeat this step for all the drivers that you require.
5 During the operating system installation described in "Installing the Driver
During a Windows Server 2003 or Windows XP Operating System
Installation" on page 25 and "Installing the Driver During a Windows
Server 2008 or Windows Vista Installation" on page 26, use the media that
you created with the
Load Driver option to load mass storage drivers.
Downloading Drivers From the Dell Support Site
1 Go to support.dell.com .
2 Click Drivers and Downloads .
3 Enter the service tag of your system in the Choose by Service Tag field or
select your system’s model.
4 Select the System Type , Operating System , Driver Language , and
Category
from the drop-down list.
5 The drivers that are applicable to your selection are displayed. From the
available list, download the drivers that you require to a diskette drive,
USB drive, CD, or DVD.
6 During the operating system installation described in "Installing the Driver
During a Windows Server 2003 or Windows XP Operating System Installation"
on page 25 and "Installing the Driver During a Windows Server 2003 or
Windows XP Operating System Installation" on page 25, use the media that
you created with the
Load Driver option to load mass storage drivers.
Installing the Driver During a Windows Server 2003 or Windows XP
Operating System Installation
Perform the following steps to install the driver during operating system
installation.
1
Boot the system using the Microsoft Windows XP/Microsoft Windows
Server 2003 media.
2 When the message Press F6 if you need to install a third party SCSI or
RAID driver
appears, press the <F6> key immediately.
Within a few minutes, a screen appears that asks for additional controllers
in the system.
book.book Page 25 Monday, September 15, 2008 2:47 PM