Administrator Guide

• Windows – remove the storelib.dll file in the C:\Program Files\Dell

\ServerHardwareManager\ServerHardwareManagerCLI folder.

• Linux – uninstall the storelib RPM installed by using OS commands.

• ESX – uninstall the storelib RPM installed by using OS commands.

Identifying enclosures and EMMs

Identifying enclosures

For other management actions, you must provide information for a respective enclosure or EMM. These

values are presented with respect to a specific adapter value provided.

To identify the attached enclosures to a specific adapter, run the following command:

shmcli list enclosures -a=<(SASAddress | AdapterIndex)>

Output

For enclosures:

Figure 2. Identifying enclosures

Identifying EMMs

To identify the attached EMMs to a specific adapter, run the following command:

shmcli list emms -a=<(SASAddress | AdapterIndex)>

For EMMs:

Figure 3. Identifying attached EMMs

Notate the Enclosure Slot Index and the WWN columns. These values are required for required command

parameters.

Identifying drawers

Verify the status and number of drives in the drawers of an enclosure by running the following command:

shmcli list drawers -a=<(SASAddress | AdapterIndex)> -enc=<(WWN | EnclIndex)>

Figure 4. Drawer 0 is the top draw or the only drawer for the enclosure.