Administrator Guide

Command syntax

shmcli (list adapters | listadapters | la) [-

outputformat=<SupportedOutputFormats>] [-h]

Parameters

Table 6. List adapters

Parameter Descrition

-h

Provides more information about the command, description

and usage.

-outputformat

You can specify the following output formats: xml or json

List physical enclosures

Description

Shows the list of physical enclosures and related information for the specified adapter. Default output (no

adapter input specified) lists all enclosures accessible by every supported adapter in the local system.

Command syntax

shmcli (list physical enclosures | list enclosures | listphysicalenclosures |

lpe)[-a=<(SAS WWID | AdapterIndex)>] | [-h]

Parameters

Table 7. List physical enclosure

Parameter Description

-a

Specify the adapter used for the command. This is either SAS

WWID or AdapterIndex.

-h

Provides more information about the command, description,

and usage.

-outputformat

You can specify the following output formats: xml or json.

Command examples

• list physical enclosures

• list physical enclosures -a = 1

• list physical enclosures -a = 500abcdefgh12345

List drives

Description

Shows the list of HDDs or SSDs and related information for the specified device. If no device is specified

to obtain drives for, all drives accessible by supported adapters in the local system are listed.

Command syntax

shmcli (list drives | listdrives | ld) ([-a=<(SAS WWID | AdapterIndex)>] [-

enc=<(WWN | EnclIndex)> [-w=<DrawerIndex>]] [-