Administrator Guide

outputformat=<SupportedOutputFormats>] [-verbose] | -enc=<WWN> [-

w=<DrawerIndex>] [-outputformat=<SupportedOutputFormats>] [-verbose] | [-h])

Parameters

Table 8. List hard disk drive

Parameter Description

-a

Specify the adapter used for the command. This is

either SAS WWID or I.

-enc

Specify the enclosure used for the command. This

is either WWN or EnclIndex.

-w

Specify the drawer index used for the command.

-h

Provides more information about the command,

description, and usage.

-outputformat

You can specify the following output formats: xml

or json.

Command examples

• list drives

• list drives -a = 1

• list drives -a=1 -enc=0

• list drives -a=1 -enc=0 -w=2 -verbose

• list drives -enc=500a123456789012 -outputformat=xml

List EMMs

Description

This command lists the EMMs (Expansion Management Module) accessible from the specified adapter.

Command syntax

shmcli (list emms | listemms | le) (-a=<(SAS WWID | AdapterIndex)> [-enc=<(WWN

| EnclIndex)>] [-outputformat=<SupportedOutputFormats>] | -enc=<WWN> [-

outputformat=<SupportedOutputFormats>] | [-h])