Administrator Guide

• list drive slots -a = 1 -enc = 0

• list drive slots -enc = 500a123456789012 -outputformat = xml

• list drive slots -a = 1 -enc = 500a123456789012 -verbose

NOTE: On Linux systems, if the verbose argument is supplied, a column labeled Logical Vols is

displayed, showing the logical drive mappings of the physical disk drive. For these values to be

discovered correctly, the following system items must be installed and configured: Device Mapper

Multipath and Smartmontools.

List fans

Description

This command lists the fans accessible from the specified enclosure.

Command syntax

shmcli (list fans | listfans | lf) (-a=<(SAS WWID | AdapterIndex)> -enc=<(WWN |

EnclIndex)> [-outputformat=<SupportedOutputFormats>] | -enc=<WWN> [-

outputformat=<SupportedOutputFormats>] | [-h])

Parameters

Table 13. List fans

Parameter Description

-a

Specify the adapter used for the command. This can be either

SAS WWID or AdapterIndex.

-enc

Specify the enclosure used for the command. This can be

either WWN or EnclIndex.

-h

Provides more information about the command, description,

and usage.

-outputformat

You can specify the following output formats: xml or json.

Command examples

• list fans -a = 1 -enc = 500a123456789012

• list fans -a = 1 -enc = 0

• list fans -enc = 500a123456789012 -outputformat = xml

List power supplies

Description

This command lists the power supply units (PSUs) accessible from the specified enclosure.

Command syntax

shmcli (list power supplies | listpowersupplies | lps) (-a=<(SAS WWID |

AdapterIndex)> -enc=<(WWN | EnclIndex)> [-

outputformat=<SupportedOutputFormats>] | -enc=<WWN> [-

outputformat=<SupportedOutputFormats>] | [-h])