Administrator Guide

List voltage sensors

Description

This command lists the voltage sensors accessible from the specified enclosure.

Command syntax

shmcli (list voltage sensors | listvoltagesensors | lvs) (-a=<(SAS WWID |

AdapterIndex)> -enc=<(WWN | EnclIndex)> [-

outputformat=<SupportedOutputFormats>] | -enc=<WWN> [-

outputformat=<SupportedOutputFormats>] | [-h])

Parameters

Table 16. List voltage sensors

Parameter Description

-a

Specify the adapter used for the command. This

can be either SAS WWID or AdapterIndex.

-enc

Specify the enclosure used for the command. This

is either WWN or EnclIndex.

-h

Provides more information about the command,

description, and usage.

-outputformat

You can specify the following output formats: xml

or json.

Command examples

• list voltage sensors -a = 1 -enc = 500a123456789012

• list voltage sensors -a = 1 -enc = 0

• list voltage sensors -enc = 500a123456789012 -outputformat = xml

List current sensors

Description

Lists the current sensors accessible from the specified enclosure.

Command syntax

shmcli (list current sensors | listcurrentsensors | lcs) (-a=<(SAS WWID|

AdapterIndex)> -enc=<(WWN | EnclIndex)> [-

outputformat=<SupportedOutputFormats>] | -enc=<WWN> [-

outputformat=<SupportedOutputFormats>] | [-h])