Administrator Guide

Parameters

Table 17. List current sensors

Parameter Description

-h, -help

Provides more information about the command,

description, and usage.

-outputformat

You can specify the following output formats: xml

or json.

-a, -adapter

Specify the adapter used for the command. This is

either SAS WWID or the AdapterIndex.

-enc

Specify the enclosure is used for the command.

This is either WWN or the EnclosureIndex.

Command examples

• list current sensors -a = 1 -enc = 500a123456789012

• list current sensors -a = 1 -enc = 0

• list current sensors -enc = 500a123456789012 -outputformat = xml

List failed drives

Description

Lists the drives that have been predicted to fail and/or drives which have returned errors through system

calls. The output describes the call attempted and the SCSI error codes returned.

Command syntax

secli (list failed drives | lfd) ([-a=<(SAS WWID | AdapterIndex)>] [-enc=<(WWN

| EnclIndex)> [-w= <DrawerIndex>]] [-outputformat=<SupportOutputFormats>] [-

verbose] | -enc=<WWN> [-outputformat=<SupportedOutputFormats>] [-verbose] | [-

h])

Parameters

Table 18. List failed drives

Parameter Description

-a

Specify the adapter used for the command. This is either SAS

WWID or AdapterIndex.

-enc

Specify the enclosure used for the command. This is either

WWN or EnclIndex.

-w

Specify the drawer index used for the command.

-h

Provides more information about the command, description,

and usage.

-outputformat

You can specify the following output formats: xml or json.