Administrator Guide

Command examples

• list failed drives

• list failed drives –a=0

• list failed drives –enc=500a123456789012

Informational commands

Show adapter information

Description

This command provides information about the specified adapter and status or count of the attached

devices.

Command syntax

shmcli (info adapter | infoadapter | ia) (-a=<(SAS WWID | AdapterIndex)> [-

outputformat=<SupportedOutputFormats>] | [-h])

Parameters

Table 19. Adapter information

Parameter Decription

-a

Specify the adapter used for the command. This is

either SAS WWID or AdapterIndex.

-h

Provides more information about the command,

description, and usage.

-outputformat

You can specify the following output formats: xml

or json.

Show drive information

Description

This command provides detailed information for the specified HDD.

Command syntax

shmcli (info drive | infodrive | id) (-a=<(SAS WWID | AdapterIndex)> [-

enc=<(WWN | EnclIndex)> [-w=<DrawerIndex>]] -d=<(WWN | EnclosureSlotIndex |

DrawerSlotIndex | Serial Number | Drive OS Path)> [-

outputformat=<SupportedOutputFormats>] [-smart] | -d=<(WWN | Serial Number |

Drive OS Path [-outputformat=<SupportedOutputFormats>>)] [-smart] | [-h])