Administrator Guide

Parameters

Table 20. Drive information

Parameter Description

-a

Specify the adapter used for the command. This is

either SAS WWID or AdapterIndex.

-enc

Specify the enclosure used for the command. This

is either WWN or EnclIndex.

-w

Specify the drawer index used for the command.

-d

Specify the hard disk drive used for the command.

This can be any of the following:

• WWN — Can be used anytime.

• Serial Number — Can be used anytime.

• Drive OS path — Can be used anytime.

• Drawer Slot Index (Index of the drive in the

specific drawer) — Use if drawer argument is

used for the command.

• Enclosure Slot Index — Use if drawer argument

is not being used for the command

-outputformat

You can specify the following output formats: xml

or json.

-h

Provides more information about the command,

description, and usage.

-smart

Display the S.M.A.R.T attribute data for the specific

physical drive.

Command examples

• info drive -a = 500abcdefgh12345 -enc = 1 -w = 0 -d = 4

• info drive -a = 1 -enc = 1 -d = //./PHYSICALDRIVE50 -smart -outputformat =

xml

• info drive -d = 500a123456789012

Show enclosure information

Description

This command provides detailed information for the specified enclosure.

Command syntax

shmcli (info enclosure | infoenclosure | ie) (-a=<(SAS WWID | AdapterIndex)> -

enc=<(WWN | EnclIndex)> [-outputformat=<SupportedOutputFormats>] | -enc=<WWN> [-

outputformat=<SupportedOutputFormats>] | [-h])