Administrator Guide

Parameter Description

-h

Provides additional information about the

command, description, and usage.

-show

Display the list of drives that are updated using the

specified firmware file. The drives are not updated

if this option is used.

-directory

Specify the directory path containing firmware files

used for the command.

-force

Using this option updates the drive firmware with

the firmware file provided, regardless of the drive's

firmware version being equal to or newer

compared to the firmware file.

-multi

Using this option causes drive updates to happen

simultaneously, increasing overall update speed

significantly. The speed increase is apparent during

multi drive updates.

Command examples

• update drive -a = 1 -enc = 1 -w = 2 -file = C:\Users\Administrator\firmware

\upgrade.fwh

• update drive -enc = EnclosureWWN -file = C:\Users\Administrator\firmware

\upgrade.fwh -force

• update drive -a = 1 -directory = C:\Users\Administrator\firmware -multi

• update drive -d = DriveWWN -directory = C:\Users\Administrator\firmware -show

NOTE: If the directory or filename contains special characters, you must enclose the file path within

escaped double quotation marks.

Update EMM firmware

Description

This command updates the firmware version of the specified EMM (Expansion Management Module)

using the provided firmware file. This command also verifies the integrity of the firmware file before

applying the firmware.

NOTE: Default behavior of the command uses the –wait functionality.

Command syntax

shmcli (update emm | updateemm) (-a=<(SAS WWID | AdapterIndex)> -enc=<(WWN |

EnclIndex)> -emm=<(WWN | EMMIndex)> -file=<FW.Filepath> | -emm=<WWN> -

file=<FW.Filepath> | [-nowait] | [-h])

Parameters