Administrator Guide

Command examples

• list drawers -a = 1 -enc = 500a123456789012

• list drawers -a = 1 -enc = 0

•

list drawers -enc = 500a123456789012 -outputformat = xml

List EMM slots

Description

This command lists the EMM Slots and associated information for the specified enclosure.

Command syntax

shmcli (list emm slots | listemmslots | lemmslots) (-a=<(SAS WWID | AdapterIndex)> -enc=<(WWN

| EnclIndex)> [-outputformat=<SupportedOutputFormats>] | -enc=<WWN> [-

outputformat=<SupportedOutputFormats>] | [-h])

Parameters

Table 9. List EMM slots

Parameter Description

-a

Specifies the adapter used for the command. This can be either SAS WWID or

AdapterIndex.

-enc

Specifies the enclosure used for the command. This can be either WWN or

EnclIndex.

-h

Provides more information about the command, description, and usage.

-outputformat

You can specify the following output formats: XML or JSON.

Command examples

• list emm slots -a = 1 -enc = 500a123456789012

• list emm slots -a = 1 -enc = 0

• list emm slots -enc = 500a123456789012 -outputformat = xml

List drive slots

Description

This command lists the HDD slots and associated information about the specified enclosure.

Command syntax

shmcli (list drive slots | listdriveslots | lds) (-a=<(SAS WWID | AdapterIndex)> -enc=<(WWN |

EnclIndex)> [-outputformat=<SupportedOutputFormats>] [-verbose] | -enc=<WWN> [-

outputformat=<SupportedOutputFormats>] [-verbose] | [-h])

CLI reference