Administrator Guide

• list fans -a = 1 -enc = 0

• list fans -enc = 500a123456789012 -outputformat = xml

List power supply units

Description

This command lists the power supply units (PSUs) accessible from the specified enclosure.

Command syntax

shmcli (list power supplies | listpowersupplies | lps) (-a=<(SAS WWID | AdapterIndex)> -

enc=<(WWN | EnclIndex)> [-outputformat=<SupportedOutputFormats>] | -enc=<WWN> [-

outputformat=<SupportedOutputFormats>] | [-h])

Parameters

Table 12. List power supply unit devices

Parameter Description

-a

Specifies the adapter used for the command. This can be either SAS WWID or

AdapterIndex.

-enc

Specifies the enclosure used for the command. This is either WWN or EnclIndex.

-h

Provides more information about the command, description, and usage.

-outputformat

You can specify the following output formats: XML or JSON.

Command examples

• list power supplies -a = 1 -enc = 500a123456789012

• list power supplies -a = 1 -enc = 0

• list power supplies -enc = 500a123456789012 -outputformat = xml

List temperature sensors

Description

This command lists the temperature sensors accessible from the specified enclosure.

Command syntax

shmcli (list temp sensors | listtemperaturesensors | lts) (-a=<(SAS WWID | AdapterIndex)> -

enc=<(WWN | EnclIndex)> [-outputformat<SupportedOutputFormats>] | -enc=<WWN> [-

outputformat=<SupportedOutputFormats>] | [-h])

CLI reference