Administrator Guide

Parameter Description

-outputformat

You can specify the following output formats: XML or JSON.

Command examples

•

list failed drives

•

list failed drives –a=0

• list failed drives –enc=500a123456789012

Informational commands

Show adapter information

Description

This command provides information about the specified adapter and status or count of the attached devices.

Command syntax

shmcli (info adapter | infoadapter | ia) (-a=<(SAS WWID | AdapterIndex)> [-

outputformat=<SupportedOutputFormats>] | [-h])

Parameters

Table 17. Adapter information

Parameter Decription

-a

Specifies the adapter used for the command. This is either SAS

WWID or AdapterIndex.

-h

Provides information about the command, description, and usage.

-outputformat

You can specify the following output formats: XML or JSON.

Show drive information

Description

This command provides detailed information about the specified HDD.

Command syntax

shmcli (info drive | infodrive | id) (-a=<(SAS WWID | AdapterIndex)> [-enc=<(WWN |

EnclIndex)> [-w=<DrawerIndex>]] -d=<(WWN | EnclosureSlotIndex | DrawerSlotIndex | Serial

Number | Drive OS Path)> [-outputformat=<SupportedOutputFormats>] [-smart] | -d=<(WWN |

Serial Number | Drive OS Path [-outputformat=<SupportedOutputFormats>>)] [-smart] | [-h])

CLI reference