Administrator Guide

Parameters
Table 21. View event log
Parameter Description
-h
Provides more information about the command, description, and usage.
-startDate
Display logs recorded on or after this date. Acceptable format is MM/DD/YY.
-endDate
Display logs recorded no later than this date. Acceptable format is MM/DD/YY.
-count
Display the latest number of events of a specified category. The viewable count of latest events can be
a value from 1 to 1000.
-event
Display logs of the given event severity type. This could be either of the following: INFO, CRITICAL,
ERROR, or WARN. Logs are printed irrespective of the severity level, if this argument is not provided.
View MD3060e SAS diagnostics
Description
Displays a list of SAS diagnostic information associated with the supplied enclosure.
Command syntax
shmcli 3060ediags (-a=<(SAS WWID | AdapterIndex)> -enc=<(WWN | EnclIndex)> [-outputformat=] |
-enc= [outputformat=] | [-h])
Parameters
Table 22. View MD3060e SAS diagnostics
Parameter Description
-a
Specifies the adapter used for the command. This is either SAS WWID or AdapterIndex.
-enc
Specifies the enclosure used for the command. This is either WWN or EnclIndex.
-h
Provides information about the command, description, and usage.
-outputformat
You can specify the following output formats: XML or JSON.
32 CLI reference