Owners Manual

Figure 18. Extend the Rails from the Rack
d Slide the extended rails over the expansion enclosure chassis rails.
e Remove the four handles from the sides of the expansion enclosure chassis.
f Slide the expansion enclosure chassis into the rack.
Figure 19. Mount the Expansion Enclosure into the Rack
6 If the drives, fans, PSUs, and EMMs were removed from the expansion enclosure chassis, reinstall these components in the chassis.
7 Secure the expansion enclosure chassis and top cover.
a Install the six clip nuts (106-569-307) into the rack holes that align with the shoulder screws on the front of the expansion
enclosure chassis.
b Use the orange enclosure latch handles to push the expansion enclosure chassis completely into the rack.
SC460 Expansion Enclosure Installation
21