Owners Manual

Figure 58. Secure Rails to Rack
5 Align the 1U cable management tray so that the UP arrow is pointed in the correct direction and the side of the tray labeled FRONT is
to the front of the rack
Figure 59. Slide Tray into the Rails
6 Slide the tray into the rails until it locks into place.
7 Prepare the cable chains and route the cables through the cable chains.
NOTE
: Label the cables before routing them through the cable chains.
a Align the cable chains so the latches are facing up and the hinges are all facing each other.
b Unclip and open all the latches on the cable chains.
52
Replacing SC460 Expansion Enclosure Components