Owners Manual

Install the Cable Management Arms
Installation of the cable management arms must be performed during a scheduled maintenance window when the Storage Center system
is unavailable to the network.
About this task
Install the cable management arms into a rack with a depth of 1200 mm (47.2 in.).
Steps
1 Align the retention latch end of the cable management arm with the bracket on the expansion enclosure .
2 Insert the cable management arm into the bracket until you hear an audible click.
The audible click indicates that the cable management arm is secure.
Figure 71. Installing Cable Management Arms
3 Swing the extension arm into alignment with the rail bracket.
Replacing SC460 Expansion Enclosure Components
59