Owners Manual

Figure 72. Align Extension Arm with Rail Bracket
4 Push the extension arm into the rail bracket until you hear an audible click.
The audible click indicates that the cable management arm is secure.
Figure 73. Insert Extension Arm into Rail Bracket
5 Repeat the previous steps for the second cable management arm.
6 Route the cables though the cable management arms.
NOTE
: Label all the cables before routing them through the cable management arms.
a Open the plastic brackets on the cable management arm.
b Route the power cables and the Mini-SAS HD cables through the plastic brackets.
c Close the plastic brackets on the cable management arm.
60
Replacing SC460 Expansion Enclosure Components