Owners Manual

7 Close the cable management arms.
a Swing the lower arm back and to the left side of the chassis.
Figure 74. Swing Lower Arm to Left Side of Chassis
b Swing the upper arm back and to the right side of the chassis.
c Align the securing tab on the right end of the lower arm with the notch over the orange release tab.
d Press the tab into the slot until you hear a click.
The click indicates that the arm is secure.
Figure 75. Swing Upper Arm to Right Side of Chassis and Secure Lower Arm
e Align the securing tab on the left end of the upper arm with the notch over the orange release tab.
f Press the tab into the slot until you hear a click.
The click indicates that the arm is secure.
Replacing SC460 Expansion Enclosure Components
61