White Papers

16 Configuring and Deploying the Dell PS Series Multi-Path I/O Device Specific Module with Microsoft Windows | TR1036
Both the included and excluded subnets are visible for MPIO as well as all iSCSI MPIO iSCSI Sessions. Note
the even distribution of iSCSI sessions to each volume across each NIC. Finally, the scroll bar allows the
ability to examine the MPIO status at a specific point in time.
Dell EqualLogic MPIO Tab Information
Component
Description
Source IP
The IP address of the source device. This is the NIC or HBA installed in the
computer that accesses an iSCSI target.
Target
The name of the iSCSI volume that is the target of the iSCSI session. When MPIO
is configured, a listing will be shown for each active session to the same volume.
Target IP
The IP address of the PS Series array’s Ethernet port
Path Uptime
The elapsed time during which this path is connected.
Managed
Indicates whether the sessions are actively managed. The text color also indicates
this. Sessions colored in blue are managed while sessions colored black are not.