White Papers

17 Configuring and Deploying the Dell PS Series Multi-Path I/O Device Specific Module with Microsoft Windows | TR1036
4 Connecting to volumes
If Auto-Snapshot Manager was used to configure PS Group access from the host then the Discover Target
Portal Step can be skipped as Auto-Snapshot Manager will do this automatically. Please refer to the Auto-
Snapshot Manager User Guide for more information about setting PS Series Group access. To configure the
Target Portal manually, please follow the steps in the next section.
4.1 Discovery of target portal
If Auto-Snapshot Manager was not used, manually adding the discovery of the target portal will be needed.
First the MPIO must be installed and configured, then this section will step through connecting to a volume.
Discovery tab in the iSCSI Initiator tool
In the Discovery tab, click Discover Portal. Previous to this step, access control for PS Series volumes
should have been already configured with CHAP authentication, multiple redundant NIC IP addresses, or a