White Papers

20 Configuring and Deploying the Dell PS Series Multi-Path I/O Device Specific Module with Microsoft Windows | TR1036
4.3 Make the PS Series Volume Available to the Server
Next, make the disk available to the server through Server Manager’s Disk Management. Right-click on Disk
Management and select Re-Scan. After Re-Scan, right-click the disk to set it online.
Disk Management
Now, use Server Manager/Disk Management, to format the volume as NTFS and assign a drive letter.
Optionally bind the newly available PS Series volume to a drive letter using the iSCSI Initiator properties
however the volume must first be a Favorite Target. To configure a Favorite Target, see the Connect to PS
Series Target section above. When connecting to the target, select the checkbox to Add this connection to
the list of Favorite Targets.
From the Favorite Targets tab, either manually add the drive letter by clicking Add or choose Auto
Configure to configure all available devices. Optionally, remove a device or clear the entire list by clicking
Remove or Clear.