Install Guide

Configure Hyper-V hosts to access SC Series arrays with SAS FE ports
19 Dell EMC SC Series Storage with SAS Front-end Support for Microsoft Hyper-V | 3026-CD-WS | V3
3. After updating the firmware, reboot the server and log in to Windows. Launch the Device Manager,
and under Storage controllers, open the SAS HBA properties and note the driver version.
SAS HBA listed in Device Manager
4. Compare the driver version with the version that is available online for your server hardware and OS.
If there is a newer driver available, download and install it. In this example, the latest driver and
firmware for the Dell 12Gbps SAS HBA is located under the SAS Non-RAID section for the Dell
PowerEdge R630 server.
Driver and firmware downloads