Install Guide

Configure Hyper-V hosts to access SC Series arrays with SAS FE ports
21 Dell EMC SC Series Storage with SAS Front-end Support for Microsoft Hyper-V | 3026-CD-WS | V3
3. Set the number of fault domains to create to 4 (the maximum possible) and click Next.
4. Review the fault domain information. A matching port on each SAS controller is automatically paired
to create each fault domain. Click Next.
Note: SAS FE ports must be assigned to a fault domain before the ports become available to host servers.
5. Allow the wizard to complete and click Finish.
6. Expand Fault Domains > SAS and click each fault domain to view the port details. The fault domains
and ports will display a status of Down until the SAS cables are connected to host server SAS ports.