Install Guide

Configure Hyper-V hosts to access SC Series arrays with SAS FE ports
26 Dell EMC SC Series Storage with SAS Front-end Support for Microsoft Hyper-V | 3026-CD-WS | V3
6. In the wizard, configure the following:
a. Provide a name for the host server. In this example, the server is named S1350.
b. Select the correct MPIO operating system from the drop-down list. Windows Server 2016
Hyper-V MPIO is used in this example.
c. Use the information from step 4 to determine the correct initiator SAS port (HBA). In this example,
the WWN ending in 4C00 is correct for the MPIO host S1350.
d. Click OK.
7. Click the new server object. Under the Connectivity tab, verify that the top and bottom controller
ports are correct. Assigning intuitive names to these ports ahead of time facilitates easy verification.
8. Repeat the steps 5–7 to create additional host servers on the SC Series array. In this example, a
second MPIO server is added named S1351.