Install Guide

Configure Hyper-V hosts to access SC Series arrays with SAS FE ports
28 Dell EMC SC Series Storage with SAS Front-end Support for Microsoft Hyper-V | 3026-CD-WS | V3
2. Click Add Server to Cluster, provide a name for the cluster, and add the desired hosts (in this
example, S1350 and S1351).
3. The selected hosts are now listed below the cluster server object.
3.7 Create and map storage volumes to the server cluster
Now that the cluster object is created on the storage array, the next step is to create and map storage to the
cluster object. In this example, a quorum disk and a cluster volume are created and mapped to the cluster
server object.
1. Right-click the desired Volumes subfolder and select Create Volume.