Install Guide

Create a Hyper-V cluster
36 Dell EMC SC Series Storage with SAS Front-end Support for Microsoft Hyper-V | 3026-CD-WS | V3
4.2 Create a new Hyper-V cluster
1. If the nodes are suitable for clustering, enable Create the cluster now using the validated nodes
on the Summary screen and click Finish to start the Create Cluster wizard. The Create Cluster
wizard can also be run from the Actions pane in Failover Cluster Manager if not continuing the steps
from the previous section.
2. Provide a name for the new cluster along with an IP address. In this example, the cluster is named
MG-HV-SAS01. Click Next.
3. On the Confirmation screen, verify that Add all eligible storage to the cluster is selected. Click
Next. Monitor the progress bar until it completes.
4. Review the Summary page and click Finish.