White Papers

8 VMware ESXi 5.5 – 6.5 Host Configuration | Rapid EqualLogic Configuration Series | Implementation Guide | REC4004
3. Select the access type that allows to Define one or more basic access points.
4. Click Yes to allow simultaneous access to this volume from more than one iSCSI initiator.
5. Click Add, and in the New Basic Access Point window, specify the type of access you plan to use
(CHAP, initiator name, or IP address).
6. In the vSphere ESXi Embedded Host client, select Storage > Adapters > iSCSI Software Adapter,
and click Rescan at the top of the Adpaters area
7. Change from the Adapters tab to the Devices tab and confirm the new EQLOGIC iSCSI Disk device
with the correct size is displayed.