White Papers

15 BP1043 | Configuring Windows Server 2008 R2 for iSCSI SAN Boot with EqualLogic Storage
Figure 2 Configuring the volume size via EqualLogic group manager
5. Select one or more of the following iSCSI access modes for the volume you are going to present
the Array Disk to:
a. Authenticate using CHAP user name
b. Limit access by IP Address
c. Limit access to iSCSI Initiator Name
Note: If you limit access based on iSCSI initiator name, then the iqn name entered here must match the
iqn name of the host server adapter that will be booting from this volume. When using two NIC ports for
redundancy, both of the ports may have different iqn names. In this case, you will need to add both iqn
names. When creating a volume you can add only one access type, however once the volume is created
additional access configuration can be added.