White Papers

18 BP1043 | Configuring Windows Server 2008 R2 for iSCSI SAN Boot with EqualLogic Storage
Figure 4 This screen shows the steps to program the flash with “bootimg.flb” file
7. Reboot to apply the new configuration. Boot to the DOS bootable key created previously.
8. Change to the directory containing the Boot Agent (\Preboot\Apps\Bootutil\Dos), and run the
following commands:
bootutil.exe –all –bootenable=iscsiprimary
bootutil.exe –all –bootenable=iscsisecondary
These commands enable network adapter ports as iSCSI primary/secondary for legacy BIOS.