White Papers

22 BP1043 | Configuring Windows Server 2008 R2 for iSCSI SAN Boot with EqualLogic Storage
Note: The USB drive and Virtual CD are detected if they are loaded.
Figure 8 Changing Hard-Disk drive sequence in System Bios
6. Under Boot Option Enable/Disable, add a check mark to the network adapter used for iSCSI boot
from SAN and also add a check mark to the Optical or Virtual CD drive. When the network
adapters are listed in “Hard-Disk Drive Sequence”, also add a check mark for “Hard drive C:”.
7. Exit to “System Setup Main Menu” and save the configuration when prompted.