White Papers

26 BP1043 | Configuring Windows Server 2008 R2 for iSCSI SAN Boot with EqualLogic Storage
Figure 11 Qlogic network adapter configuration menu
2. In the Function Configuration menu, change the Protocol type to IBFT for network adapter ports
used for iSCSI Boot as shown in Figure 11.
3. Highlight the Function column for the network adapter and press [Enter] to open the Adapter
Settings menu for that network adapter port.
4. Enable ROM and select the IP format IPv4.
5. Enter the Initiator Settings menu and disable DHCP, then enter the initiator details such as:
Initiator IP address, subnet mask, gateway, and CHAP details as needed. See Figure 12 below.