White Papers

28 BP1043 | Configuring Windows Server 2008 R2 for iSCSI SAN Boot with EqualLogic Storage
Figure 13 Target Settings for Qlogic network adapter
7. Exit to the Function Configuration menu and enter information for other network adapter ports as
needed.
8. Once complete, press [ESC] and select Save changes. Reboot the system when prompted.
9. Continue to Section 8 for steps to install Windows 2008 R2.
7.3 Configuring the Broadcom network adapter for iSCSI boot
Use the following steps to configure the Broadcom network adapter for iSCSI boot from SAN.
1. When booting the system, press [CTRL+S] to configure the Broadcom network adapter.
2. In the device list, select the network adapter port used for booting and press [Enter].
3. In the Main Menu, choose MBA configuration.
4. Change Boot Protocol to iSCSI and press [ESC] to exit to the main menu.