White Papers

29 BP1043 | Configuring Windows Server 2008 R2 for iSCSI SAN Boot with EqualLogic Storage
Figure 14 MBA Configuration Menu for Broadcom network adapters
5. Choose iSCSI Boot Configuration. Select General Parameters and press [Enter].
6. Under General Parameters, ensure that all settings match those shown below. You can also see
these settings in Figure 15.
a. Disable TCP/IP Parameters via DHCP
b. Disable iSCSI Parameters via DHCP
c. Disable CHAP Authentication
d. Change Boot to iSCSI Target to “One Time Disabled”
e. Disable HBA boot mode