White Papers

34 BP1043 | Configuring Windows Server 2008 R2 for iSCSI SAN Boot with EqualLogic Storage
Figure 18 Selecting location for Windows 2008 R2 installation
14. Select the drive and click Next to start the Windows installation.
Note: When redundant network adapter ports are configured for iSCSI boot, the EqualLogic iSCSI volume
might appears as two disks. Select the volume that is not listed as “Offline”.
15. The Windows installer copies and expands files and installs features and updates. Once the
installation is complete, the server reboots.
16. The system then boots from the iSCSI volume and completes Windows setup.
17. Continue to configuration steps in Section 9 to setup the system according to the best practices.