White Papers

10 SCG1004 Force10 S60 Configuration Guide for EqualLogic SANs
FTOS(conf-if-range-te-0/48-49)#no shutdown
FTOS(conf-if-range-te-0/48-49)#flowcontrol rx on
FTOS(conf-if-range-te-0/48-49)#port-channel-protocol lacp
FTOS(conf-if-range-te-0/48-49-lacp)#port-channel 1 mode active
FTOS(conf-if-range-te-0/48-49-lacp)#exit
FTOS(conf-if-range-te-0/48-49)#exit
FTOS(conf)#exit
2.13 Save configuration
FTOS# copy running-config startup-config
2.14 Configure additional switch
Repeat the commands from section 2 to configure the second switch.