Owner manual

Statement of Volatility – Dell U2715H
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the
problem.
The Dell U2715H contains both volatile and non-volatile (NV) components. Volatile components lose their data
immediately after power is removed from the component. Non-volatile (NV) components continue to retain their data even
after power is removed from the component. The following NV components are present on the U2715H system board.
Table 1. List of Non-Volatile Components used in Dell U2715H
Description
Reference
Designator
Volatility Description
User
Accessi
ble for
external
data
Remedial Action (Action
necessary to prevent loss of
data)
Firmware
Flash
ROM
U402 Non Volatile Serial flash memory,
16 Mbit.
No Software write protected
Frame
Storage
U405 Volatile DRAM memory, 1 G bit. No
System
EEPROM
U403
Non Volatile memory, 16 Kbit.
Yes
Hardware write protected
HDMI1
EDID
EEPROM
U109
Non Volatile memory, 2 Kbit.
No
Hardware write protected
HDMI2
EDID
EEPROM
U115
Non Volatile memory, 2 Kbit.
No
Hardware write protected
USB Hub
Setting
EEPROM
U507
Non Volatile memory, 2 Kbit.
No
Hardware write protected
USB Hub
Setting
EEPROM
U502
Non Volatile memory, 2 Kbit.
No
Hardware write protected
CAUTION: All other components on the system board lose data if power is removed from the system. Primary power
loss (unplugging the power cord and removing the battery) destroys all user data on the memory (DDR3, 1067MHz).
Secondary power loss (removing the on-board coin-cell battery) destroys system data on the system configuration
and time-of-day information.
______________
© 2014 Dell Inc.
Trademarks used in this text: Dell™, the logo is trademarks of Dell Inc.
Jan 2014