User Manual
Manuals
Brands
Dell Manuals
Computer Hardware
UPS 10000R
11
12
13
14
15
16
17
18
19
20
Table Of Contents
Table of Contents
Introduction
Finding Information
Safety Warnings
Installation
Inspecting the Equipment
Unpacking the Cabinet
Rackmount Setup
Installing the UPS
Connecting the EBM to the UPS
Installing Remote Emergency Power-off
Hardwiring the UPS Input
UPS Initial Startup
UPS Rear Panels
Operation
UPS Startup and Shutdown
Starting the UPS
Starting the UPS on Battery
UPS Shutdown
Control Panel Functions
Changing the Language
Display Functions
Startup Screen
Screen Locked
Operating Modes
Active Notices and Alarms
Battery Operating Status
Event Log
Measurements
Control Screens
Identification
Settings
Transferring the UPS Between Modes
Transferring from Normal to Bypass Mode
Transferring from Bypass to Normal Mode
Setting the Power Strategy
Retrieving the Event Log
Behavior on Overload
Configuring Load Segments
Controlling Load Segments Through the Display
Configuring Automatic Start Delay
Configuring Automatic on Battery Shutdown
Configuring Battery Settings
Configuring the UPS for an EBM
Running Automatic Battery Tests
Configuring Automatic Battery Tests
Configuring Automatic Restart
Additional UPS Features
RS-232 and USB Communication Ports
Dell UPS Network Management Card (Optional)
Environmental Monitoring Probe (Optional)
Dell MUMC and Dell ULNM Software
UPS Maintenance
UPS and Battery Care
Transporting the UPS
Recharging and Replacing Batteries
Testing Batteries
Updating the UPS Firmware
Specifications
Troubleshooting
Accessing Alarms and Conditions
UPS Status Menu
Event Log Menu
Alarms, Notices, and Events
Silencing the Alarm
13
Installation
|
Figure 2. Shipping Carton Contents
1
...
...
11
12
13
14
15
...
...
92
