User Manual

14
|
Installation
Unpacking the Cabinet
CAUTION: Unpacking the cabinet in a low-temperature environment may cause condensation to occur in and
on the cabinet. Do not install the cabinet until the inside and outside of the cabinet are absolutely dry (hazard
of electric shock).
CAUTION: Installing or removing the battery trays should be performed or supervised by personnel
knowledgeable about batteries and the required precautions. Keep unauthorized personnel away from
batteries.
CAUTION: The cabinet is heavy (see page 79): Always remove both battery trays from the UPS before lifting
the cabinet. Lifting the cabinet into the rack requires a minimum of two people.
CAUTION: The batteries are heavy (32 kg/71 lb). Use proper lifting techniques when removing the batteries.
NOTE: Use care when moving and opening the carton. Leave the components packaged until ready to install.
To unpack the system:
1 Using a forklift or pallet jack, move the shipping carton and pallet near the rack where you will
install the UPS (see Figure 3).
Figure 3. Lifting the Pallet with Shipping Carton