User guide

10 Configuring the EMP
3 Click Save to save your changes.
Notification Notification of each status change if enabled. When the Notification box
is selected, the following functions are activated for each event selected:
• Display in the list of current alarms
•Consideration in the UPS log
• SNMP trap generation
• Notification by e-mail. The Environment Log check box must be selected
on the Email Notification page.
NOTE: Refer to the Network Management Card user’s guide for more
information on e-mail notification and for a list of alarm messages.
System Shutdown Selection triggers a system shutdown for each selected notification. This
option is available only for parameters that have Notification selected.
Show advanced parameters Selection displays the Hysteresis parameters and system shutdown
options.
Parameter Description