Manual

33
Configuring the Card
|
Table 9. UPS Alarms (continued)
Alarm On Alarm Off
Inverter overload Inverter load OK
Inverter over temperature Inverter temperature OK
Inverter short circuit Inverter OK
Inverter thermal overload Inverter load OK
Load not protected - On Automatic Bypass Load protected - Return from Bypass
Load short circuit Load OK
Load not powered Load powered
Protection Lost Protection OK
Emergency button ON Emergency button OFF
Fan fault Fan OK
Redundancy Lost Redundancy OK
Low battery Battery OK
UPS communication failed UPS communication restored
UPS data base not available UPS data base OK
UPS on battery UPS on normal AC
UPS internal fault UPS OK
UPS overload L1 UPS overload Level 1 cleared
UPS overload L3 UPS overload Level 2 cleared
UPS overload L3 UPS returns to normal load
UPS overtemperature UPS temperature OK
Imminent UPS shutoff UPS OK
UPS exceeds current threshold UPS returns to normal current
Battery high voltage fault Battery voltage OK
Normal AC voltage too high Normal AC voltage OK
Normal AC voltage too low Normal AC voltage OK
Inverter voltage too high Inverter voltage OK
Inverter voltage too low Inverter voltage OK
UPS configuration fault in memory UPS configuration OK
ABM state floating ABM state Off
ABM state charging ABM state Off
ABM state resting ABM state Off