Manual

Configuring the Card

Access Control

Click Access Control from the menu bar to configure the different parameters to allow secure access to

the card using a browser or SNMP.

NOTE:

If you are not already logged on, you will be prompted to enter your user name and password before

accessing this page.

NOTE: Restart the card to activate any configuration changes.

Figure 35. Access Control Page

Configurable access control settings are:

S Enter New Manager User Name: This text field (limited to ten characters) enables secure access

and modification of pages. Default value is admin.

S Enter New Password: This text field (limited to ten characters) enables secure access to

Configuration menu pages. Default value is admin.

S Confirm New Password: Re-enter the new password.

S SNMP: This option allows enabling or disabling SNMP communication. Default value is Disabled.

S Current Community Read-Only name is: Displays the current the SNMP community name used

for read operations.

S Change Community Read-Only: This text field (limited to 49 characters) enables the SNMP

community name used for read operations to be changed.