Manual

MIB Objects

This chapter describes the Management Information Base (MIB) files available with the card. A MIB is

an information repository residing on a device in a communication network. Network management

software uses a device's MIB to manage the device. Every manageable device on a network has a MIB

consisting of one or more files that list information about the device.

Use the facilities provided by your Simple Network Management Protocol (SNMP) management

software to access the individual MIB objects. The objects define the information available about your

UPS.

You can configure a device so that it generates a trap if a certain condition occurs, such as an alarm

clearing. The trap is sent to the management station to inform it of the occurrence.

This chapter contains an overview of MIB definitions for each of the MIB files:

S IETF UPS MIB

S Dell UPS MIB

S RFC 1213 UPS MIB II

IETF UPS MIB

Table 11 lists IETF UPS MIB objects. The MIB OID (object identifier) is 1.3.6.1.2.33. All variables are

in read-only mode.

Table 11. IETF UPS MIB Objects

Variable Name and Relative XML Object Path OID Variable Type Variable Unit

upsIdentManufacturer

UPS.PowerSummary.iManufacturer

1.1.1 Display String

—

upsIdentModel

UPS.PowerSummary.iModel

1.1.2 Display String

—

upsIdentUPSSoftwareVersion

UPS.PowerSummary.iVersion

1.1.3 Display String

—

upsIdentAgentSoftwareVersion

No Relative XML Object Path

1.1.4 Display String

—

upsBatteryStatus

UPS.PowerSummary.PresentStatus.BelowRemainingCapacityLimit

1.2.1 Integer —

upsSecondsOnBattery

UPS.PowerSummary.PresentStatus.Discharging

1.2.2 Integer Sec