Manual

79
Operation and Maintenance
|
Operation and Maintenance
This chapter explains:
S Serial cable pinout
S Detailed serial configuration menus
S Firmware upgrade instructions
Serial Cable Pinout
Figure 37 shows the serial cable and pinout.
Female DB-9
Connector
Male RJ-45
Connector
Female DB-9
Connector
Male RJ-45
Connector
Frame
2
3
5
Frame
3
6
4
Shielded Cable
Figure 37. DB-9/RJ-45 Serial Cable and Pinout
Serial Configuration Menus
Use the supplied cable to connect the card to a computer.
1 Connect the card to a computer equipped with an emulator such as HyperTerminal. Set the serial
link at 9600 baud, 8 bits, no parity, 1 stop bit, and no flow control.
2 Verify that the UPS power is on.
6