Users Guide
82
|
운전 및 유지보수
S Modify Network settings:존의 트워크 매변수 수정( 림 42 참조). 카드를 재시작하여
새로운 매변수를 활성화함. DHCP 모드에서, 카드는 DHCP 서버 설정에 따라 다음 은
매변수들을 수신할 수 있음.
- IP 주소
- 서브 마스크
-이트웨이 주소
참:
시리얼 링크를 통하여 IPv6 주소를 성할 수 없습니다. IPv6 주소는 address 카드 또는 IPv6 DHCP
서버에 의해 제됩니다(IPv6 DHCP 서버를 트워크에서 이용할 수 있는 우). 49 페이지의
"트워크 설정"을 참조하여 IPv6 능을 활성화하 IPv6 설정을 성하십시오.
For each of the following questions, you can press <Return> to select the
value shown in braces, or you can enter a new value.
Should this target obtain IP settings from the network?[N]
Static IP address [166.99.18.129]?
Subnet Mask IP address [255.255.248.0]?
Gateway address IP address [166.99.17.1]?
Wait while your new configuration is saved ...
Reset the card to enable the new configuration.
림 42. 트워크 설정 수정