Release Notes

Port preferences on Wyse 5070 Extended thin client:
● Optional port can be used as second RJ45, SFP, or VGA.
NOTE: Ensure that you do not disable the WiFi option in the BIOS setup. You cannot use the second RJ45 or SFP
module if you disable the WiFi option in BIOS.
● On the device with wireless module, the optional port cannot be used as second RJ-45 or SFP.
● If front headphone is used, the back headset is disabled.
● When monitor is connected on USB-C port, DP2 becomes inactive.
● When VGA monitor is connected on VGA optional port, DP3 becomes inactive.
● Power option is available on the first serial port.
● PCle slot is available.
Table 41. Ports
Ports DP1 DP2 DP3 VGA USB Type-C mDP4 mDP5 DP6
Monitor
priority
1 2B¹ 3B² 3A² 2A¹ 4 5 6
4K display Yes Yes Yes No³ Yes Yes Yes Yes
Non-4K
display
Yes Yes Yes Yes³ Yes Yes Yes Yes
¹DP2 and USB Type-C port are mutually exclusive with USB Type-C port taking higher priority.
²DP3 and VGA port are mutually exclusive with VGA port taking higher priority.
³VGA port supports only 1080p resolution.
Display matrix:
Table 42. Wyse 5070 Extended thin client with AMD GPU
Number of displays Supported display resolution
4K resolution
3840 x 2160 @ 60 Hz
Non-4K resolution
Up to 2560 x 1600 @ 60 Hz
One display Yes Yes
Two displays Yes Yes
Three displays¹ Yes Yes
Four displays Yes Yes
Five displays No² Yes
Six displays No² Yes
¹For three displays, Dell Technologies recommends that you configure first two 4K displays on the main board (DP1~DP3), and
the third 4K display on AMD GPU card.
²Support only four monitors with 4K screen resolution @ 60 Hz and the remaining displays with 2K screen resolution.
Monitor priority—The following order defines the monitor priority set on ThinLinux 2.2 for Wyse 5070 Extended thin client:
● DP1 > DP2 > DP3 > mDP4 > mDP5 > DP6
● DP1 > USB-C > DP3 > mDP4 > mDP5 > DP6
● DP1 > DP2 > VGA > mDP4 > mDP5 > DP6
● DP1> USB-C > VGA > mDP4 > mDP5 > DP6
For more information about configuring multiple displays on Wyse 5070 Extended thin client, see the Dell Wyse ThinLinux 2.2
Administrator's Guide at support.dell.com.
NOTE: INI parameters are not supported on a multidisplay setup with more than three displays.
ThinLinux version 2.2.0.00 41